Return to Colt Carbine H2 Buffer
Sort By::
Page of 2
Click to see more items


  1 of 1 people found the following review helpful:
 
5 of 5 It's a H2. What can I say? July 29, 2019
Reviewer: Neth from Dallas, GA United States  
It's a Colt H2 buffer.  Runs perfectly in my LE6920 Law Enforcement Carbine with stock spring.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 robert wood July 29, 2019
Reviewer: robert wood from Orlando, FL United States  
same as above

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Worked great! March 1, 2019
Reviewer: Christopher M from St Augustine, FL United States  
Got a 10.5in AR and the H2 buffer worked perfectly with it! Colt makes great quality products!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
4 of 5 It works. February 18, 2019
Reviewer: Micah Keochanpheng from Seattle, WA United States  
Finish on this was not so great, but it works.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Colt H2 marked buffer! January 28, 2019
Reviewer: Cav Trooper 19D from Pittsburgh, PA United States  
AU provides exactly what they say!
  100% Colt new H2 buffer. Specifically wanted H2 marked. So not to confuse buffers when changed. Clear bumper not yellow bumper. Colt buffer face roll/punch H2. Not dot matrix style sold by Colt too. Both are 100% acceptable. I did take it apart. Was that bumper tight! ;-). Correct weights n pads. Weighed first, but the weights werent knocking independently. Seemed like solid piece. Figured the oil made a hydraulic lock on weights n pads which prevented the intended knocking momentum. Took out and just put them back in. Probably from storage or something. Kept the oil on weights and pads. Now they float independently knocking together with full momentum impact. Part of having buffer is to lessen bolt bounce. Not just dwell time n cyclic rate.
  The roll pin was slightly longer on both ends of buffer cylinder which is dead on Colt! Not flush. Exactly what i wanted to see!
  Fantastic AU! Thank U for the fair price n incredible free shipping

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Much better January 2, 2019
Reviewer: wcNM from NM United States  
Replaced an H buffer with this one in a 14.5 carbine.  Works great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 November 2, 2018
Reviewer: Ron Ellis from Topeka, KS United States  
Very satisfied with product and great price. Thank you very much.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Owner, Leon Wilson - PACEM LLC October 3, 2018
Reviewer: Leon Wilson from Waco, TX United States  
Great Product Fast Shipping

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Ejection Pattern July 17, 2018
Reviewer: Gunther Reinhart from AZ  
I recently received my first suppressor.  Was running a "H" buffer and the ejection was in the 1 o'clock position.  Wanted to see if a "H2" would move it to the 3 or 4 o'clock position.  It did improve things and is now in the 2 and 3 o'clock positions.  "H3" would probably get me where I'd like but I'm happy with "H2" for now.  Recoil is ever so slightly reduced.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 20, 2018
Reviewer: PC from Miller Place, NY United States  


Was this review helpful to you?

   
  Click to see more items